| After-sales Service: | One Year |
|---|---|
| Warranty: | One Year |
| Type: | Preform Injection |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Good Price High-Speed PET Preform Making Injection Molding Moulding Machine
| Unit | D250-PET | |||||||
| ITEMS | A | B | C | |||||
| INECTION UNIT | Screw Diameter | mm | 50 | 55 | 60 | |||
| Screw L/D Ratio | L/D | 22.0 | 20.0 | 18.3 | ||||
| Shot Size(Theoretical) | cm3 | 497 | 601 | 715 | ||||
| Injection Weight | g | 452 | 547 | 651 | ||||
| Injection Pressure | MPa | 224.0 | 185.1 | 155.6 | ||||
| Injection Rate into Air | cm3/s | 195.3 | 224.0 | 236.3 | 271.0 | 281.3 | 322.5 | |
| Injection Stroke | mm | 253 | ||||||
| Injection Speed | cm/s | 9.5/11.6 | ||||||
| Screw Speed | rpm | 189 /232 | ||||||
| CLAMPING UNIT | Clamping Force | KN | 2500 | |||||
| Clamping Stroke | mm | 550 | ||||||
| Space Between Tie Bar | mm | 580*580 | ||||||
| Max. Mold Height | mm | 600 | ||||||
| Min. Mold Height | mm | 250 | ||||||
| Eject Stroke | mm | 160 | ||||||
| Eject Force | KN | 67 | ||||||
| No. Of Ejector Pins | piece | 9 | ||||||
| OTHERS | Max. Pump Pressure | MPa | 17.5 | |||||
| Pump Motor Power | KW | 22.0 | 30.0 | |||||
| Heater Power | KW | 14.7 | ||||||
| Hopper Capacity | Kg | 50 | ||||||
| Oil Tank Capacity | L | 550 | ||||||
| Weight | T | 8.2 | ||||||
Energy Saving
The pressure and flow differ in each stage of plastic injection. The RPM of the traditional oil pump motor is invariable, so the redundant oil just overflows into the oil and o lot of energy wasted.
Servo motor injection molding machine is able to control the RPM by computer, thus the hydraulic pressure matches the power needed in run, ensuring the quality of products with lower energy consumption. Also, high sensitive pressure feedback system helps achieving fast response close loop control.
Energy saving effect reaches to 30%~70%, especially more for products needing long cycle time.
Our servo system was the energy saving device that can save Min.50% electricity power for larger models of injection molding machine
Large cutting and processing equipment, strictly controlling the size,quality and processing quality for each component part & mold platen!
Customer service
1,After the equipment acceptance, we guarantee the quality with one year, and serve in time when need. Once equipment goes wrong, after receiving information, under the condition that there is no special things, maintenance man will respond with 48 hours.
2,Beyond the period of warranty, this company will offer technological service and customer service for life.
Technical service
Installation and adjustment
After the equipments are arrived at the customer's site, the customers is responsible for unpacking and arranging the equipment according to the placement drawing; and do under our install-adjust technicians' guidance.
According to requirement of water, electricity, hydraulic oil, air and the demands of quality level and pipeline, the User should connect the wire, cable and pipe of water, air and steam to the special position ordered in the installation area of production line ahead of time. Other relevant matching equipment and project should be finished before we adjust our equipment.
We'll bring a suit of portable installation and adjustment tools ourselves during the period of installing and adjusting, the other instruments we need should be furnished by the customer for free including hydraulic oil, pipeline, antirust preventer etc. that needed in the installation and adjustment site.
The customer should dispatch the capable person to accept training in the installing site.
Training
We are responsible for offering the technical training to user. The training content includes the structure and maintenance of the equipments, control and operation of the equipments. The training lessons are finished in the process of installation and adjustment. Through training, users' technical staff can grasp and the skill of operation and maintenance proficiently, and deal with the general troubles in time.
Quality assurance
We guarantee the goods offered are brand-new, unused, with latest design and suitable material made, and we guarantee the specification of the equipments is consonance with the contract.
We are responsible for the fault and damage of the production line caused by our design, technology, manufacture, installation, adjustment and material defect etc that all belong to our responsibility.
Maintenance
Offer 12 months maintenance period to the problem that caused by our design, manufacture and the material quality, and offer the relevant parts and effective service for free for above reason. We will offer a widely and favorable technical support, after service all the time after guarantee period.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}